To the page content
compare-box

the sssnake SXX8030

756

Multicore Cable

  • 8-Way
  • XLR female to XLR male
  • Length: 3 m
  • Colour: Black
Item number 105054
Sales Unit 1 piece(s)
Channels 8
Length 3,00 m
Connector 1 XLR 3-pol male
Connector 2 XLR 3-pol female
Balanced Yes
Input 8
Returns 0
Snake 1
Show more
£19.40
Including VAT; Excluding £10 shipping
In stock
1
Need help?
Contact
Contact
Contact

756 Customer ratings

4.5 / 5
Rate now

quality

handling

256 Reviews

y
Great Quality for price
yanickflyer 21.12.2020
Use:
I have been it between my T Amps and QU-24 Mixer from A&H
So it is used to carry my mix output signal to my amps

Pros:
Very good quality and build for it's price range
Does not have feedback/humming and I have been using it for over a year
Good plain solid cables

Cons
As for handling, the female connector part is a bit too tight. You could damage the connector if not careful

I would just slightly loosen the female connector to make it easier to remove as well
Use:
I have been it between my T Amps and QU-24 Mixer from A&H
So it is used to carry my mix output signal to my amps

Pros:
Very good quality and build for it's price range
Does not have feedback/humming and I have been using it for over a year
Good plain solid cables

Cons
As for handling, the female connector
Use:
I have been it between my T Amps and QU-24 Mixer from A&H
So it is used to carry my mix output signal to my amps

Pros:
Very good quality and build for it's price range
Does not have feedback/humming and I have been using it for over a year
Good plain solid cables

Cons
As for handling, the female connector part is a bit too tight. You could damage the connector if not careful

I would just slightly loosen the female connector to make it easier to remove as well
quality
handling
1
1
Report

Report

o
Good solution
olyp 22.05.2023
We had individual cables between our wireless microphone receivers and our digital mixer, at my church, which had to be setup and disconnected every week.

To help other volunteers in my technical team, I had labelled these cables and the end points on the receivers, using rather messy looking manual labels with paper and tape. and the cables were prone to becoming tangled.

With this cable which is labelled on both ends, gone is the messy labels, and its so neat looking and elegant way - this is definitely how things should be done. It will make our setup and packing up, so much faster.

The cables worked 1st time, when I replace our old cables at church last week.
We had individual cables between our wireless microphone receivers and our digital mixer, at my church, which had to be setup and disconnected every week.

To help other volunteers in my technical team, I had labelled these cables and the end points on the receivers, using rather messy looking manual labels with paper and tape. and the cables were prone to
We had individual cables between our wireless microphone receivers and our digital mixer, at my church, which had to be setup and disconnected every week.

To help other volunteers in my technical team, I had labelled these cables and the end points on the receivers, using rather messy looking manual labels with paper and tape. and the cables were prone to becoming tangled.

With this cable which is labelled on both ends, gone is the messy labels, and its so neat looking and elegant way - this is definitely how things should be done. It will make our setup and packing up, so much faster.

The cables worked 1st time, when I replace our old cables at church last week.
quality
handling
0
0
Report

Report

T
Studio Use
TommyVee 30.11.2015
I use a couple of these in the studio, one for going to the drums and another to miscellaneous mics. Long enough to get where I need them to go and well built.

Pros & cons - No cons at this price. The numbers help to know where you are and the build is good quality. There's no point spending 4x this price on a loom unless you're touring it, so for studio use it's perfect.

Will buy again and again.
I use a couple of these in the studio, one for going to the drums and another to miscellaneous mics. Long enough to get where I need them to go and well built.

Pros & cons - No cons at this price. The numbers help to know where you are and the build is good quality. There's no point spending 4x this price on a loom unless you're touring it, so for
I use a couple of these in the studio, one for going to the drums and another to miscellaneous mics. Long enough to get where I need them to go and well built.

Pros & cons - No cons at this price. The numbers help to know where you are and the build is good quality. There's no point spending 4x this price on a loom unless you're touring it, so for studio use it's perfect.

Will buy again and again.
quality
handling
2
0
Report

Report

i
Good value
ijeezy 24.01.2020
Hard to find anywhere or any way to get an 8ch XLR loom for less than this. If you're careful with it, it'll last longer but if you have to occasionally have to snip and replace an end, it's still cheaper than buying a more expensive loom.
quality
handling
0
0
Report

Report

Did you know?