To the page content

Schaller Keystone SR Lock. 3L/3R NI

146

Machine Head Set for Electric Guitar

  • 6 Pieces
  • Set configuration: 3 Left / 3 Right
  • Schaller article nr: 10140123.16.55
  • Perfect vintage dimensions and true to original look
  • Top locking clamping
  • Construction: Closed
  • Buttons: Keystone single ring
  • Ratio: 1:16
  • Shaft length: 19.5 mm
  • Bore: 9.8 mm
  • For max. headstock thickness 15.4 mm
  • Attachment via screw(s) and locknut
  • Surface: Nickel
  • Fastening screws, banjo bolts and washers included
  • Made in Germany
Available since March 2014
Item number 331684
Sales Unit 1 piece(s)
Colour Nickel
Locking Yes
Design Vintage
B-Stock from £58 available
£63
Including VAT; Excluding £10 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

146 Customer ratings

4.5 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

111 Reviews

T
Perfect.
Twansmusic 23.09.2020
Perfect tuners for my les paul!
My les paul came stock with robot tuners I didnt like.
I knew I loved locking tuners but I never liked the look of them.
These tuners solve the issue! They work great, have a fantastic locking feature, keep the guitar in tune and look vintage!

10/10 literally perfect.
quality
2
0
Report

Report

M
Basically unusable
Milberry 09.02.2021
I wanted to upgrade stock tuners on some of my Gibson guitars. These Schallers at first seemed a perfect choice. But then came a big disappointment.

Having read mostly positive reviews, I bought two sets at once. They came in packed in very nice boxes, reminding of a new iPhone. But that's where good things end... Here are the problems that followed:

1. The tuners simply don't fit the headstocks of my Gibson guitars (SG, ES, LP): the supplied shims make the position of the string hole too low to the extent that is it partially blocked by the screw nut that holds the tuner. Well, this can be to some extent overcome by using Gibson's stock shims instead of the ones that are supplied with the Schaller tuners. Yet the sting holes remain too low (which is ridiculous given Gibson headstocks are all angled and do not require directing strings downward as Fenders do). As a result, I could barely put the bass E string into the hole in the tuner (it was a 0.46 gauge). So, if you use thicker strings, for sure the low E string would not come through.

2. The 1st E string could not be clamped in position properly and kept creeping out of the lock (as I was turning the tuner to tune up the string, the tone remained the same or even dropped as the string was slipping out of the lock).

3. Upon installation, all strings did not stay in tune even after a couple of re-adjustments. Compared to Fender locking tuners, the difference in the tuning stability is huge.

4. One of the tuners was outright defective (too loose).

Thus, I'm sending back both sets, which to my regret Thomann will have to handle somehow with Schaller.

And, quite obviously, I cannot recommend this product because, in my opinion, it is a total fiasco. Alas.

Overall, I now consider Schaller products as poor quality and not Gibson-friendly, as the whole situation reminds me of Schaller strap locks whose installation on a Gibson guitar is similarly a big problem, especially with the screw in the lower part of the guitar, let alone other well known issues with these locks.

That's not what we, guitar lovers, expect from the stereotypically superb German engineering. Period.
quality
1
2
Report

Report

h
Happy at last ;)
hammerh34d 01.11.2019
Fitted them in my LP Studio, replacing Tronical, which replaced stock.
As a bedroom guitarist I practice some blues now, so I bend a lot. In spite of it the tuning is quite stable and usually needs only minor adjustments before play.
If you're new to locking tuners, remember not to overtighten the locking pins, or your E wil break :)
Overall - very happy. The only thing which may not be perfect is the color of tuning pegs, which does not match stock
quality
0
0
Report

Report

M
Changing strings is now a pleasure :)
M666 06.07.2021
These tuners make changing strings a very pleasant process, you just pull the string through the pole, clamp it and done. No more winding, string falling out of the hole.
The installation on a Gibson Les Paul Studio 2016 is very easy, no issues with compatibility.
My only complain is that the locking cap requires in my opinion slightly too much force to clamp the string.
quality
0
0
Report

Report