Zaor Vision W

The desk arrived in two huge boxes, and I had to leave them for a couple of months whilst my home studio was built. I was very happy after all that time that there was no shipping damage and all parts looked good.
The wording of how the connectors work is a bit vague (says to not tighten, but you do have to screw them all the way in and then tweak the angle, I found the first set i left them just in by hand and it does not work like that, the holes won't align) along with the instructions of exactly when to fit the first few. But once you start, it becomes much clearer. I have to knock a star off for the rack rails. They are seriously rough and the holes are not very well made. It was a genuine struggle to attach them, the far sides are screwed in which is fine but the middle ones use a bolt system. But the holes are so poorly aligned that i basically had to hit it with a hammer to get it in, and I think I gave up on one. They still seem sturdy enough though. Overall, very happy with the desk and a big step up from my ikea hack job. One thing to note is the top shelf for displays and monitors, is just a hair too short for A7X, so they hang off the back a little. No bother though as they are still firmly solid.

Great design, easy to complete, everything fits well, sturdy. Works well with Zaor Vision K, good heights, good fit, good looks – exactly the feel from the photos in shop.
The only problem we have encountered was with the screws connecting the legs together – they were 5mm shorter and we almost could not complete the furniture – however - we just bought new screws (with the exact specs from manual) in small shop around the corner, so we finished the table in one sitting anyway. We are happy to have this table and still will buy one more for our other studio, we just hope that it was a simple mistake and other tables have the correct screws.

I've had this desk for about 6 months now. This is probably the best studio desk I've ever used. First up, it arrived on a wooden palette heavily packaged (like, really heavily packaged) and all parts were flawless. If you've ever built Ikea furniture then you'll have no problem with this, but building it alone was fairly challenging. The panels are so heavy and solid. I got through most of it on my own, but for the final stages of assembly I needed someone else to help me lift the panels into place, and turn the desk right-side up. Too heavy to do by myself.

In terms of daily usage, this thing is a beast. It's so heavy and solid that there's absolutely zero sideways wobble or movement - rock steady. There are lots of nice little thoughtful design touches to it which I love, and appreciate everyday: the front edge of the tabletop is nicely curved for comfort on your forearms, the angle of the cable tray on the underside is just perfect for you to get visibility and access to the back of your rack gear from underneath, and I recently discovered that the rack mounts have just the right amount of gap between the bottom of your rack gear and the desktop surface, allowing you to squeeze through some cables if you need to get them neatly from the back to front-mounted jacks. And finally, personally I find the height of the riser platform just perfect for my monitors to sit at just the right height to my ears, and my screen to sit directly in front.

I've thought hard, but I can't find fault at all in this desk's design and construction. Highly recommended!!