To the page content
compare-box

Rockboard Flat Patch Y Splitter Cab 30cm

139

Y-Splitter Cable

  • Length: 30 cm (11 13/16")
  • Flat Y-splitter cable with rectangular cross-section
  • For splitting TRS stereo signals into TS mono signals or as insert cable for TRS effects loops
  • Space-saving and extra narrow angled jack plugs
  • 2x Separate flexible copper conductors: 20 x 0.12 mm
  • Wrapped copper screen: 34 x 0.12 mm
  • Polyethylene signal isolation
  • PVC external insulation
  • Capacity of less than 10 pF / decimeter
  • Conductor resistance of less than 10 mOhm / Decimeter
  • 1x Angled 6.3 mm TRS jack plug
  • 2x Angled 6.3 mm TS jack plugs (gray / black)
  • Tip = Grey
  • Ring = Black
  • Working temperature: -15 ° C to + 70 ° C
  • External dimensions of cable (W x H): 4 x 3 mm (rectangular)
  • External dimensions of plug (W x H): 12.5 x 7.5 mm
  • Colour: Black
Available since August 2018
Item number 445215
Sales Unit 1 piece(s)
Colour Black
Length 0,30 m
Connector 1 Jack 6,3mm TRS male
Connector 2 Jack 6,3mm TS male
Connector from Jack 6,3mm TRS male
Plug out Jack 6,3mm TS male
Show more
£7.30
Including VAT; Excluding £10 shipping
In stock
Delivery approx. between Monday, 10.03. and Tuesday, 11.03.
1

139 Customer ratings

4.7 / 5
Rate now

quality

62 Reviews

TS
Very happy works good!
Theofanhs Siderhs 07.02.2022
from the few options on the market, Ιt helps me to leave the solid output of the iridium and to enter the input of the delay echoplex which is trs, the second one goes from the trs output of the echoplex to the 2 inputs of the prod2 DI, it works perfectly so far of course the cables are a bit thin and the only thing that helps is that there is more dancing on my pedalboard.
quality
0
0
Report

Report

J
Insert cable
JensWel 21.10.2022
Used to insert EQ into vocal processor in rack.. In this stationary environment the cable works, but it could be too flimsy for taking out and in repeated times.
quality
0
0
Report

Report

A
Intermittent connection
AleksanderS 15.02.2025
I've had it for 2 years, but it has been dropping connection since the day I bought it and first connected it. Have to fiddle with it to get it to the right position to get the sound to go through, and then it might work for a while. Looks like a manufacturing defect or a quality-control issue, which I guess can happen. It would be a really good cable if it was working fine, other users seem to be happy with theirs. Bought it to use it with my Rockboard MOD 3 Patch Bay. The flat cable has great rubber and is really nice and soft, easy to handle, and the L connectors are small and waste no room.
I've had it for 2 years, but it has been dropping connection since the day I bought it and first connected it. Have to fiddle with it to get it to the right position to get the sound to go through, and then it might work for a while. Looks like a manufacturing defect or a quality-control issue, which I guess can happen. It would be a really good cable if it was
I've had it for 2 years, but it has been dropping connection since the day I bought it and first connected it. Have to fiddle with it to get it to the right position to get the sound to go through, and then it might work for a while. Looks like a manufacturing defect or a quality-control issue, which I guess can happen. It would be a really good cable if it was working fine, other users seem to be happy with theirs. Bought it to use it with my Rockboard MOD 3 Patch Bay. The flat cable has great rubber and is really nice and soft, easy to handle, and the L connectors are small and waste no room.
quality
0
0
Report

Report

NS
Great option to split signal
Nigel ST 21.10.2021
Bought this to split the signal from my switcher going into my stereo Ernie Ball volume/pan pedal, which then is connected to two separate amps.
Only 4 star, as one of the amps is always much louder than the other and I couldn't really find the solution yet, how to solve this problem.
Maybe it's me, not the cable, but still it is annoying that one amp's sound is too tiny.
Bought this to split the signal from my switcher going into my stereo Ernie Ball volume/pan pedal, which then is connected to two separate amps.
Only 4 star, as one of the amps is always much louder than the other and I couldn't really find the solution yet, how to solve this problem.
Maybe it's me, not the cable, but still it is annoying that one amp's sound
Bought this to split the signal from my switcher going into my stereo Ernie Ball volume/pan pedal, which then is connected to two separate amps.
Only 4 star, as one of the amps is always much louder than the other and I couldn't really find the solution yet, how to solve this problem.
Maybe it's me, not the cable, but still it is annoying that one amp's sound is too tiny.
quality
0
0
Report

Report

Did you know?