To the page content

RME DPS-2

Start 360°

Linear Power Supply for RME ADI-2 Series

Output 1 (linear): classic DC output with multi-stage passive and active filters, 30,000 µF capacitor bank, ferrite choke and an active output filter with hybrid voltage regulator
Output 2 (µFilter) is based on the RME µFilter technology, the signal is additionally processed from the pre-filtered linear output with active filters, the output voltage is measured and regulated directly at the DC connector by means of the supplied DC special cable using a sensor
60 VA audio toroidal transformer with additional insulation winding and magnetic shielding tape for hum- and noise-free operation
Ground lift switch
Two multi-coloured front LEDs to indicate operating states and errors (existing input and output voltage, overload, undervoltage, short circuit)
Recessed push switch for AutoDark mode
Exterior dimensions (W x H x D): 130 x 52 x 205 mm
Weight: 1.89 kg

Connections:

DC output Linear 12 V 2.5 A
DC output µFilter 12 V 2.5 A
GND screw terminal
Input for power cable

30-Day Money-Back Guarantee

3-Year Thomann Warranty

Available since July 2024

Item number 594955

Sales Unit 1 piece(s)

Secondary Voltage 12 V

Output current in mA 2500 mA

AC/DC AC/DC

B-Stock from £799 available

£929

All prices incl. VAT

Delivery free of charge expected between Wednesday, 27.11. and Thursday, 28.11.

in Misc. Power Supplies

Bundles & offers

RME DPS-2 B-Stock May have slight traces of use

RME DPS-2 B-Stock
May have slight traces of use

Smart Navigator