To the page content

Kali Audio LP-8 2nd Wave Sonarworks Bdl

Bundle offer comprising

Sonarworks SoundID Ref Spk & HP w Mic

Reference for speakers and headphones with measurement microphone (box)

  • Speaker and headphone calibration software and measurement microphone in a bundle
  • Precise adjustment of the frequency response to get flat and neutral sounding monitor speakers or headphones
  • Enables a more precise evaluation of recordings and mixes
  • Room analysis and automated calculation of the room size based on several measurements
  • Audio calibration engine allows for accurate processing
  • Save an unlimited number of calibration profiles for monitor speakers
  • Comes with headphone calibration profiles for more than 280 supported models
  • Target curve custom adjustments in real time
  • Translation check simulates over 20 different devices and device types for accurate mix translation results
  • 3 filter modes to choose from: Zero Latency, Mixed and Linear Phase allow to optimize filter quality and latency according to the monitoring situation
  • Additional processing controls for Mono, Dry/Wet and Safe Headroom
  • App only: MIDI mapping for various controls and user presets for predefined output device/channel pair combinations
  • Measurement microphone with a pre-polarized electret-condenser capsule
  • Frequency response: 20 - 20.000 Hz with calibration curve
  • Omnidirectional polar pattern
  • Sensitivity: 14 mV/Pa
  • Self noise: 24 dB
  • Signal to noise ratio: 70 dB
  • Dynamic range: 106dB
  • Maximum sound pressure level: 132 dB SPL
  • Requires 48 V phantom power
  • Connector: 3 pin XLR
  • Microphone calibration file for 30° off-axis measurements in Sonarworks software native format to be used with SoundID Reference
  • Microphone calibration file for 0° on-axis measurements in .txt format

2x Kali Audio LP-8 2nd Wave

Active 8" Nearfield Monitor

  • 3D Imaging waveguide technology for large, imaginary stereo stages
  • Bass reflex system
  • Boundary EQ to adjust the sound in different studio environments
  • Power: 100 W (60 W / 40 W bi-amped)
  • Loudspeaker configuration: 8" woofer with reduced mass, 1" soft dome tweeter
  • Frequency range: 37 - 25000 Hz
  • Crossover frequency: 1500 Hz
  • Sound pressure level: 85 dB SPL continuous
  • Inputs: XLR, 6.3 mm jack (balanced), RCA
  • Input sensitivity XLR / 6.3 mm jack: +
  • 4 dBu
  • Input sensitivity RCA: -10 dBV
  • Dimensions: 419 x 254 x 286 mm
  • Weight: 9 kg
  • Housing colour: Black
Available since November 2021
Item number 530817
Sales Unit 1 piece(s)
Speaker size 1x 8", 1x 1"
Amplifier power per unit (RMS) 100 W
Magnetic Shielding No
Analogue XLR Input Yes
Analogue Input (Jack) Yes
Analogue Input (Mini Jack) No
Analogue Input (RCA) Yes
Digital input No
Manual frequency correction Yes
Frequency range min. 37 Hz
Frequency range max. 25000 Hz
Dimensions in mm 419 x 254 x 280
Weight in kg 9,0 kg
Speaker Hous8ing - Woofer System Bassreflex
Show more
£575
Free shipping incl. VAT
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1