Thon Rackdrawer 1U

I'm using this as a pedal tray in a guitar rack and it's proved it's worth.

Nice smooth ball bearing assisted action. As it's a pedal tray for me it does get used a lot when changing settings on pedals, and it seems robust enough to last.

Fairly easy to fit in a rack, which is a bonus.

easily managed to fit 8 standard size pedals, a voodoo lab pedal power 2 and an rjm mini effect gizmo without issue.

Recommended for use as a pedal tray.

I bought this to use with the ProducerRTA studio desk but sadly the ProducerRTA desk has no rear rack mountings... but I won't hold that against the rack unit.

Just be aware that you need to check whatever you're going to use this for that the rack unit has rear mounts - otherwise for me it was unusable... good quality though.

I installed it in the Thomann Rack Case 6U. Installation was easy for me - pay attention to the one correct orientation of each part and it's done in 15 minutes. The mechanism is a bit tight and you need more force to slide it out than expected, but it feels sturdy. I appreciate the holes I can use to fasten the devices on top with zip ties. It's a good product.

Hi everyone,

Not much can be said about this, apart from to confirm that the rack drawer is made from good gauge steel with roller bearing runners. I've used it to hard wire some non-standard sized outboard units in a rack, which has been just the job.

Not to mention the great Thomann prices and service, as I've come to expect over many years. I'll keep coming back for as long as I'm able!

I use these units for putting my pedals into racks. Although it's made from steel it's not super stable. It bents due to the weight of the pedals. I don't mind....
You can install these units up untill 50 cm depth between the frontrails and backrails from the rack. Just move one screw on each side from the mountingrail from the backside and you can move that rail way up further than is specified in the productdescription.

Bought this as I needed a to get desktop synths out of the desk and into my rack. Construction is solid and the drawer barely wobbles even tough I had to bent the attachment point very heavily as my rack has few degrees of angle and it was needed to open it level.

Bought two but one of them was a bit rusty. I didn't return it, because I wasn't eager to bother with it: packing and going to post office. Anyway, it isn't visible in the rack and it doesn't affect the functionality. Therefore 3/5 for quality and 4/5 in overall.

I like this tray. Pefect for my guitar pedals set up as FX in the rack. FGot it all hooked up and running smoothly. The tray itself is a bit lightweight and flexy but I made it work. Seems strong enough for a while.

I bought a few of these to use in a studio rack for using effects pedals on .
Really great well made easy to slide in and out.
I would highly recommend these but they are frequently out of stock so people must like them 👍
I actually need two more when they come back into stock.😎

it does what it has to do