To the page content

Thomann NB 4.0

24

Audio Transmitter Balun

  • 4 RCA signals transferrable via network cable over up to 670 meters
  • No transmition possible using a hub or the like
  • Operatable only with 2 devices
  • No power supply needed
  • Incl. mounting angle
  • Dimensions: 92 x 70 x 25 mm
Available since December 2010
Item number 252772
Sales Unit 1 piece(s)
Design Box
Distribution Type 1in4
RJ45 connection female
Number of RJ45 connections 1
Signal Connection RCA female
Number of Signal Connectors 4
Connector in RJ45 female
Connection out RCA female
£20.20
Including VAT; Excluding £10 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
Delivery approx. between Wednesday, 18.12. and Thursday, 19.12.
1

24 Customer ratings

4.5 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

13 Reviews

N
Handy little boxes
NyquistAudio 24.09.2018
Nice sturdy build quality. These were a great solution for me. I'm using these to get extra returns down a single cat5 run for 2 stereo IEMs - going from a console into a Samson S-phone headphone amp to drive Fischer beltpacks in stereo. Unbalanced input on the headphone amp, but these boxes give me a balanced run, and eliminated problems I had with lighting dimmer buzz.
1
0
Report

Report

j
An eye opener
janusM 13.08.2023
This quad ballun really does the job. I used it with 25m of cat6 cable. But when testing (still coiled) I picked up some hum. So I modified it by soldering a ground wire on the casing of the internal RJ45 female connector in on of the 2 boxes. Perfect sound now !
I will also solder myself some balanced cinch-XLR cables (pin 1 unconnected), so that I can send microphone signals through this wiring.
quality
1
1
Report

Report

AJ
saved my life
Abdulla J. 17.07.2020
i used it for long distance (120m) installation audio transfer and it does what it claims nicely.

will buy again.
quality
1
1
Report

Report

S
Not Compatible with the the sssnakeCat Snake 3M series
SEGFAULT 25.11.2024
If you are in the position I was in, wondering how to connect a tape deck "all the way over there" to a mixer "over here" then you may have wondered if you can connect this to a the sssnakeCat Snake 3MC
the sssnake Cat Snake 3MC to get RCA to XLR via a balanced CAT cable.

If you are like me you may have figured out friom the manuals that to have a chance of working you need to open the unit and swap around two connections so the pinouts match.

I am here to tell you that doesn't work. The impedance mismatch between the transformer and the input of your XLR interface is too high for a passive system to overcome. The resulting audio is thin and tinny.

If you buy a second one and use it as intended it works great (although a little pricy for what it is)
quality
0
0
Report

Report