With our cookies we would like to offer you the best shopping experience possible with everything that goes with it. This includes, for example, suitable offers, personalized ads and remembering preferences. If this is okay with you, simply agree to the use of cookies for preferences, statistics and marketing by clicking on "Alright!" (show all). You can withdraw your consent at anytime via the cookie settings (here)
Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.
After logging in you will also find all items you can rate under rate products in the customer centre.
An ingenious design for a right-angled XLR connector. Easy to assemble and disassemble. Once assembled it won't fall apart easily.
Easy to work with and solder.
Clever design allows you to set the rotation angle of the socket pins with respect to the rest of the connector (before soldering).
Not sure how to remove the socket pins part after it has been inserted into the housing.
Includes a little shroud to prevent the cables from short-circuiting against the metal shell of the connector. This is the part that needs special care and more care than when working with straight XLR connectors.
Usual Neutrik quality. Avoid the temptation to buy cheap XLR connectors which can be unreliable.
quality
0
0
Report
Report
G
Crazy good quality
Gtux 29.09.2020
Neutrik makes the best plugs.
quality
0
0
Report
Report
A
Good design with some issues
Anonymous 16.05.2014
I bought several of these right angled connectors for a patch panel that is mounted on the front of a wheeled flightcase, the straight ones would stick out too far and I wanted to leave them connected when the front cover was on. They work well, a bit fiddly to solder due to the design but not too bad. One frustration is that once you have put the pin section into the metal housing, you can't get it out again - so make sure you solder them up before you do this! Also due to the design you can only set the plug up to some predefined angles - every 30 degress or so. No too much of a bit deal but worth bearing in mind if you have a specific need or limited space.
quality
2
0
Report
Report
O
Industry standard
OriginalMarkyT 31.05.2018
It's Neutrik, it does what it should and does it very well. 5 different positions from fitting to cable are useful. We use with a Shure Beta 91a mic & can angle the cable to the side of the mic for a compact placement.