Kluson MS6LC

Set of 6 in line, oval buttons, closed-type, 1 : 15 ratio, complete with washers and screws. This is a high quality product, with a perfect chrome finish. I used them to replace my Squier Bullet Strat tuners, and needed to enlarge the headstock holes with a tapered reamer hand tool (Squier tuner is 7-8 mm, Kluson are 10 mm). I also needed to fill one of the two screw holes of the Squire tuners, but the second hole fits the Kluson single hole peg - so no need to drill new holes. Very happy about this upgrade. By the way, the Bullet Strat is an excellent guitar, worth much more of its price.

Replacement for my Squire Tele machine heads. These are nice and well made, easy going and keep the tunning stability. I could imagine a little bit "softer moving" but they work great anyway.
Be sure, you drill the hole in right size before you screw in the screw.

I replaced the tuners on my daughters Gypsy Rose strat with these Klusons and it improved tuning stability quite dramatically. Great stuff

Modern as in non-vintage... :) I upgraded a Harley Benton strat type guitar with vintage tuners and had to enlarge holes from 8 to 10 mm and cover old screw holes (and drill new screw holes as well), The heads are turning very smooth and the ratio is perfect for fine tuning. The tuning stability is very good but I i'm not a trem user. Very good product,

very high quality product. looks much more expensive than it costs. I work idly. the course is smooth. I advise you to buy this. I put on my TV vintage from harley benton. I had to work with a drill since the old pegs were 6 mm

Pro's:
Hold tuning well
Nice chrome finish

Cons:
The screws are kind of soft, and easily stripped. Just be careful while screwing these in.

Fine tuners, nice price.

Very happy with the replacement of the crappy tuners of my black flying v HB. Very nice quality and finally able to finetune.

The best tuners for the price. I replaced the tuners on an old 90's Hurricane Telecaster and a Stratocaster Japan copy. They are very smooth like the Gotoh ones but a lot cheaper! They need a 10mm hole and a 45° screw tab angle.
Recommented.