EVE Audio SC2070 SoundID Bundle

Bundle offer comprising

2x EVE Audio SC2070

Active 2-Way Studio Monitor

• Speaker configuration: 6.5" woofer with 150 W output power and AMT RS7 tweeter with 100 W output power
• Class-D power amplifier
• Frequency range (-3 dB): 38 - 25,000 Hz
• Maximum level: 116 dB (per pair)
• Built-in limiter
• Smart Knob on the front panel with various settings: Volume, High-Shelf Filter, Mid EQ, Desk Filter Boost, Desk Filter Cut, Low-Shelf Filter, LED Brightness
• Adjustment options via DIP switch: volume fix, filter fix, max. input +7 / +22 dB
• Connections: XLR, RCA
• Dimensions (W x H x D): 230 x 345 x 304 mm
• Weight: 9.4 kg
• Price per piece

Sonarworks SoundID Ref Spk & HP w Mic

Reference for speakers and headphones with measurement microphone (box)

• Speaker and headphone calibration software and measurement microphone in a bundle
• Precise adjustment of the frequency response to get flat and neutral sounding monitor speakers or headphones
• Enables a more precise evaluation of recordings and mixes
• Room analysis and automated calculation of the room size based on several measurements
• Audio calibration engine allows for accurate processing
• Save an unlimited number of calibration profiles for monitor speakers
• Comes with headphone calibration profiles for more than 280 supported models
• Target curve custom adjustments in real time
• Translation check simulates over 20 different devices and device types for accurate mix translation results
• 3 filter modes to choose from: Zero Latency, Mixed and Linear Phase allow to optimize filter quality and latency according to the monitoring situation
• Additional processing controls for Mono, Dry/Wet and Safe Headroom
• App only: MIDI mapping for various controls and user presets for predefined output device/channel pair combinations
• Measurement microphone with a pre-polarized electret-condenser capsule
• Frequency response: 20 - 20.000 Hz with calibration curve
• Omnidirectional polar pattern
• Sensitivity: 14 mV/Pa
• Self noise: 24 dB
• Signal to noise ratio: 70 dB
• Dynamic range: 106dB
• Maximum sound pressure level: 132 dB SPL
• Requires 48 V phantom power
• Connector: 3 pin XLR
• Microphone calibration file for 30° off-axis measurements in Sonarworks software native format to be used with SoundID Reference
• Microphone calibration file for 0° on-axis measurements in .txt format