Customer reviews about Enttec Open DMX USB Interface

v

Good but old device

vooku 23.04.2021

I have used this interface repeatedly with different setups of SW and HW and it has never failed me. Sadly it's rather old and often not supported by modern software, even made by Enttec! Even the SDK supplied by the manufacturer is so old it's almost unusable nowadays. If you want DMX from you computer, don't cheap out and get the DMX Pro.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Does not support TouchDesigner

Alexzen 29.11.2019

Unfortunately, it does not runs with the TouchDesigner. You can find out about this on the manufacturer’s website (there is a list of apps with which it works), but I did not. Keep this in mind.

I have no other problems with the interface. I think it works as it should in other software.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

F

Does what it says

Frodlaw 03.04.2024

If you’re looking to control a single universe/have a small set up, this device is great. Paired with Beam 4 Live it’s simple to sett up and an effective addition to a live setup

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Ä

Well-made, but hard to find inexpensive software

Ädi 29.12.2018

This interface works well, but the software that runs on it is either very poorly developed or expensive as hell.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

E

Good

EmmanuelSound 10.09.2019

Really good, with Windows works fine.
Got a little trouble using it with my MacBook Pro 2018 and LightKey

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

s

samdmx 18.05.2021

bon produit, prix intéressant pour avoir un contrôle dmx.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Enttec Open DMX USB Interface

417 Customer ratings

You have to be logged in to rate products.

35 Reviews

Served with love!

Enttec Open DMX USB Interface

417 Customer ratings

You have to be logged in to rate products.

35 Reviews