Boss PCS-20A

I though I had purchased a splitter that could be used with a 9v Boss type power supply. Turns out it can't be used like that, the plugs won't fit. It can only be used as a splitter from the 9v dc power output on a Boss tuner. My mistake, I should have checked the specs better but it's something to be aware of (and to be honest I think the product description should have mentioned this).

The quality is decent for the price. Nothing outstanding but slightly more robust than the cheapest 9v power cables out there.

Recommended, but make sure you know what you're buying.

perfect for what i need. as is very often the case with guitarist such as myself, i find myself chopping and changing me effects VERY often. sometimes i will be very happy with a particular et of sounds or equipment, but next night, i will decide i need to change things. it can be avery complicated business indeed to use some of the modern type of multi effects units indeed. i have used most of the big brands over the years, with varying levels of success i must add. i then decided that i would go OLD SCHOOL ,and return to single pedals in front of me for all of my live work at least, if not recording also. i then found to my cost, that batteries do NOT last very long at all,and are also VERY expensive to use in the long term. so i bought a power supply,and set of these most EXCELLENT daisy chain leads,and i am still using them today, many years later;-) success!

I would primarily recommend the Boss BCB-60 pedal board which ships with the power supply unit and all necessary cables, but if you are using something else this is absolutely your choice for connecting your Boss effect pedals to a shared AC/DC power adapter.

Never had any problems with the Boss PCS-20A, but in my opinion the cable could be a bit thicker and the plugs sturdier. However, careful handling is the key here. You don't want to have sudden power breaks, cracks or any extra hiss/hum!

You'll need a power supply unit with a DC output, or if you are using a Thomann power adapter NT AC/PSA or similar, then one effect pedal with a DC output - a Boss Line selector LS-2 or a Boss Noise suppressor NS-2 or a Polytune chromatic tuner, for example. That's where you connect this connector cable and share the power then with the rest of your pedals (1+7). Voíla!