Customer reviews about Behringer CP1A – Thomann United Kingdom

c

Nothing beats this at this price...

curck 11.08.2020

This is my first Behringer Eurorack buy.
It does exactly what it suppose to do.
I would buy it again.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

c

Works as advertised.

cablesaurus 26.03.2023

So this comes with two power outs for 2 ribbon buses with 14 power parking spaces for your modules. I've had no issues with power. From the operational perspective, I don't think about it at all, it just runs the rack.

I've had good success using a Bosch GAA18V-24 to supply power to the CP1A - so that's been a useful solution for small & portable power (total run time of the kit will vary when running off a battery).

It does not have a lot of features (does it need any?) it's pretty basic. It came packaged really well. As far as I can tell, it does exactly what Behringer claims it's supposed to do.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

m

Really nice and cheap power module

mkok 08.03.2021

I've been using this for my small eurorack system for quite some time already and I have zero negative comments about this. Everything works well, no power issues observed with the modules and the build quality is good. It is amazing that you can get the complete power solution (incl. flying bus cables and power adapter) for such a low price.

One thing I've also noticed with this, that the module will not heat up when used, or at least this will not happen with my rack, that draws max 500mA current. I've also used Tiptop uZeus and that thing heats up a lot!

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

J

Powerful and affordable

JMLZ 18.10.2021

I've had three of these since they first became available and I just got the fourth one.
Does what it says on the tin and does it very well.
They power two rows of 84hp each with still plenty of power to spare. Zero issues.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

b

biancasima 24.01.2021

I wanted a 0hp power source, but the behringer is so cheap i’d rather diy it to the back of the box. If you just add up the power brick and the bus boards it’s still cheaper than anything tip-top, and you basically get a power source for free.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

s

It works

startrec 10.05.2022

It works.

The black stripe with metallic edges look ties in nicely with any module aesthetically. (as they tend to be either black or metallic usually)

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

YF

Using it only as a back up

Yann F 03.01.2023

I don't trust Behringer due to really bad experiences in the past, so I don't trust that thing but it was what I could afford at the time and it hasn't failed me yet.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Good Eurorack Power Supply

Alvino 24.07.2020

Fits in both Behringer Go Case and Behringer 104. With only 1A at 12V, 1A at -12V and 500mA at 5V, it's enough for Behringer modules. Your needs may vary. Great price.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

IK

Behringer CP1A

IOANNIS KINTZOGLOU 13.01.2021

It's enough for lot modules.All you need at great price!!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

LM

Really good value

Lanky Master 22.02.2021

I am using this as a dedicated PSU for my Expert Sleepers ES-9 which uses around 500mA reducing the load on my Doepfer PSU3 in my modular case. Very easy to fit, nice toggle switch nothing to complain about.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Behringer CP1A

106 Customer ratings

You have to be logged in to rate products.

12 Reviews

Served with love!

Behringer CP1A

106 Customer ratings

You have to be logged in to rate products.

12 Reviews