Customer reviews about Adam Hall Stands SLED 1 ultra XLR 4 A

V

Perfect for Yamaha

Vinny 22.08.2018

Used with LS9, not suitable for Behringer or ideas 32 as the XLR is wrong way round & cannot be rotated. But for the rest of the consoles out there this works great. Dimmable & has its now on/off switch on the head.

2

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

T

Good all-rounder

Tommy_K 07.09.2023

A good, well made light.

Points to note
- It did not emit any light at less than 60% power on my Behringer X32
- It does not have an upside down plug meaning you may have to bed the light significantly in order to use it with some products (like the X32)

Other than that, no complaints, nice easy button on top, all good :)

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

S

Stratis512 29.03.2019

Not suitable for Midas M32. Had to rotate 180 degrees the xlr to fit properly

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

S

Gooseneck Lamp

Srakec 18.03.2021

I use the light on the x32 compact. It works without a problem, maybe for this model it could be a few inches longer, but even without it it is great !

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

v

Allen & Heath qu16

verysuperw1 20.04.2020

The light works well. When you use it on the Allen & Heath qu series, you need to change the + en - on the 5 pin connector in order for it to work.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

S

Great for A&H QU Series

Skinda0 11.01.2019

Nice bright light wigh good height above the desk. On/off switch comes in usefull when light is not required.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Upside Down for Midas M32 Live

AngeloG 18.09.2023

The stem goes towards the botton instead of upwards when connected to Midas M32 console. Beware !!!

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

D

Needs rewired to work with A&H desks

DaveScot 09.12.2022

This unit works fine but be aware that you will need to swap the wiring to make it work for an Allen & Heath audio desk. Easy enough to do if you can use a soldering iron.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

A

Good value for money

A.Mu.Se 08.12.2020

Adequate light and length.
However, I had to change the pins and rotate it a bit to work on my Allen Heath Qu-16.
The XLR connector does feel a bit flimsy.

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

P

Possible to rotate XLR to use with X32/M32

Prebsi 13.06.2023

To use with Behringer/Midas, it is possible to remove the two screws and then rotate the plug part 180 degrees.

1

0

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

Adam Hall Stands SLED 1 ultra XLR 4 A

117 Customer ratings

You have to be logged in to rate products.

12 Reviews

Served with love!

Adam Hall Stands SLED 1 ultra XLR 4 A

117 Customer ratings

You have to be logged in to rate products.

12 Reviews