To the page content

22.11 - 02.12

cyberweek-deal

the sssnake Effect Pedal Adapter Straight

934 Customer ratings

4.2 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

48 Reviews

the sssnake Effect Pedal Adapter Straight
£2.11
Including VAT; Excluding £10 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
Delivery approx. between Thursday, 28.11. and Friday, 29.11.
1
A
Flawed by design
Algirdas 21.05.2013
It is pretty well made but has major flaws. For one, it cannot be used to connect pedals that have jacks not parallel to the floor. If that was the case, the adapter would put a lot of pressure on the jacks and damage the circuit boards that they're soldered to. The other disadvantage is that if you used these adapters to connect all your pedals and one of them broke down, you would have to remove all your effects from the board just to disconnect a single pedal. This adapter could be vastly improved by making its center section flexible. That way there would be no risk of damaging the pedals.
quality
1
0
Report

Report

G
Good connector
G-T-R 23.01.2015
Good connector which is mainly intended for use for connecting pedals on pedal boards. Overall good quality although the overall length could have been a bit shorter? Your pedals will be quite spaced apart from each other with this. Not necessarily a good thing if you want to fit in more pedals. Personally I would use cables instead of this one. Of course this is best suited for use with similar pedals? indeed the jack connectors of the pedals need to be aligned at the same height on the edge of the pedal etc. since this is not a flexible cable.
quality
0
0
Report

Report

D
Looks smaller than it is
DimitriosB 13.07.2017
I bought this product to reduce the empty space between my pedals on the pedal board. Although the cable clutter is limited, the space between pedals is actually increased. So keep that in mind.

Apart from that, I cannot comment on the sound quality since the differences are negligible compared to other alternative products.
quality
0
0
Report

Report

A
Anonymous 28.06.2014
This is a solid good quality connection but..... If you are thinking of using it to connect guitar pedals and thus avoid lots of cable mess there can be some issues.

If the input jack on the pedals is not at the exact same height these inflexible connectors can put strain on the pedals input jack when you press down on the pedal with your foot. Over time this can damage the pedals. So if you are sure the jack height is the same (eg. when connecting pedals from the same manufacturer) then fine. But otherwise flexible connectors are better in my view.
quality
0
0
Report

Report

EJ
Space Saver!
Eoghan J. 30.07.2015
This is a good tool for saving space and increasing your much needed pedal board real estate! I would recommend these to anyone putting a board together - the only thing about them to consider is whether or not your pedals inputs are the same height - if so, you're on to a winner. Will buy again.
quality
0
0
Report

Report

A
What can go wrong?
AC 05.07.2016
In a word, nothing. Much better made than the offset version of these. Just be careful that you get them lined up ight, therwiise something will break - more likely the pedal than the connector.
quality
0
0
Report

Report

A
Solid and well made
Anonymous 21.10.2014
This is perfect if you have a number of pedals with side inputs in the same place. I've noticed no noise or loss of quality with these plugs and they look (and feel) chunky and solid. I prefer to use these rather than patch leads whenever possible as they're smaller and sturdier. I'm pleased with mine.
quality
0
0
Report

Report

M
Too specific
MihaG 05.03.2014
This adapter will work just fine, if you have two pedals with the jacks at exactly same height, but if not, whenever you will put weight on either pedal, or the pedals' weight itself, could over time damage either the adapted or the input of the pedal.
I only reccomend buying this if you have the option of adjusting the height of individual pedals.
I have fixed this by using some paper which I put under the lower pedals, which works, but isn't pretty nor a permanent solution.
The good side is that it's cheap and replaceable, so if you don't want to spend much and if you don't mind using random things to adjust the heights of your pedals, go for it.
quality
0
0
Report

Report

M
Works fine
Maksym 18.10.2020
Works fine with me. A bit long, not a perfect solution if you want to save some space.

Pros:
- low price;
- acceptable quality.
Cons:
- a bit long.
quality
0
0
Report

Report

A
Good, but not snakelike at all
Anonymous 13.04.2016
When is a guitar lead not a guitar lead? When it is this crazy little thing. Like some sort of Escher object. I bought a good few of these back when I had a couple of boss pedals (a couple means 2 or more in Ireland) and they were fantastic. No use of course if your rig of choice is a fuzzface, a clon centaur and a metal zone pedal.
quality
0
0
Report

Report

the sssnake Effect Pedal Adapter Straight